OP
The circled item "OK" is not there.
I do not have "other devices."
I do not have "other devices."
VTPro download on Vista
- Thread starter CoralSeaMan
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
I get "ports(COM & LPT)
USB serial port (COM5)"
and under USB serial bus controlers USB serial converter [just like in your picture]
USB serial port (COM5)"
and under USB serial bus controlers USB serial converter [just like in your picture]
It looks as the drivers are installed OK
I think it could be that the OceanLog may not look for devices beyond Port 3.
If you right click on "USB serial port (COM5)" and click on properties, click "Port Settings" Tab.
Then click the Advance button.
See if you can change the COM Port Number to COM3.
OP
Port setting said that COM Port 3 was in use. I changed it anyway. The computer still cannot find the device.
By the way, thanks for the patience.
By the way, thanks for the patience.
No problem but I am running out of ideas.
Has the "USB serial port (COM5)" changed to "USB serial port (COM3)"
after a restart and un-plug and plug-in of the lead.
OP
It was COM3 before and after a restart and un-plug and replug of the lead
If it now looks like this then it should be OK
I don't know what more suggest, maybe its time to ask Doug Krause in the Oceanic section to ask his teckies.
http://www.scubaboard.com/forums/oceanic/
Sorry I could not help.
OP
Thank you very much for your effort
Doug Krause has just posted that Version 2.1.5 of OceanLog is out
I have just noticed now that Oceanic have Issued new USB drivers for Vista
Oceanic Worldwide - Owner Services - Software
Similar threads
