Question about standard regulator servicing

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I won't say "money is not an issue", but I also don't mind paying the money for a solid piece of equipment that I can depend on. Considering how important the 1st and 2nd stages are, I'm not sure I'd be comfortable with used equipment.



Are you saying this lets you crack it open while stored? What is the benefit of that? I mean while stored it isn't under pressure anyway right?
IMHo you put to much emphasis on the importance of the regulator. The emphasis should be more on the thaining. Theregulator is not your life support. Your training is. Buying used poses little risk if you know what to buy or have someone who can insure tjereg istuned correctly.

As for the feature of the 250v. Inside the second stage there are 2 important pieces a soft seat and a metal oriffice. The soft seat is normally pressed to the oriffice witha spring. When you inhale or purge the diaphragm acts on a lever that moves away the soft seat and lets the air in. When the seat is pressed into the oriffice all the time ittakes a set ang a groove is formed. Too much of a groove and the performance ofthe reg degrades. Sothe feature allows to releave the pressure on the seat so it does not take the set and that prolongs the life.
 
IMHo you put to much emphasis on the importance of the regulator. The emphasis should be more on the thaining. Theregulator is not your life support. Your training is. Buying used poses little risk if you know what to buy or have someone who can insure tjereg istuned correctly.

You are 100% correct, but on the flip side that doesn't mean you would intentionally dive with bad equipment either :) I do see your point though. As a new diver though i'm still scared of having to deal with equipment failures like a free flowing reg. Or running otu of air because my SPG isn't reading properly.

As for the feature of the 250v. Inside the second stage there are 2 important pieces a soft seat and a metal oriffice. The soft seat is normally pressed to the oriffice witha spring. When you inhale or purge the diaphragm acts on a lever that moves away the soft seat and lets the air in. When the seat is pressed into the oriffice all the time ittakes a set ang a groove is formed. Too much of a groove and the performance ofthe reg degrades. Sothe feature allows to releave the pressure on the seat so it does not take the set and that prolongs the life.

Thanks for explaining that to me. Makes perfect sense. I wish I understood better how these things work.
 
You are 100% correct, but on the flip side that doesn't mean you would intentionally dive with bad equipment either :) I do see your point though. As a new diver though i'm still scared of having to deal with equipment failures like a free flowing reg. Or running otu of air because my SPG isn't reading properly.
In your case I would not hesitate to go with MK17/G250V , it will not save you from the problems mentioned but it is a very solid and dependable combo and for what it does it's quite under priced compared to other SP options :)
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom