Where to keep SPG on a dive

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

When diving with my wife and on video/photo shoots I crisscross the SPG under my left arm to my right shoulder D-Ring. My Octo is crossed to my right shoulder which means i can hover inches from the bottom. Not a standard config by any means but communication beforehand is important whenever diving with 'non-standard' gear, and my wife knows the positioning.
 
I use the left shoulder d-ring. It just happen with a 26 inch hose it is readable by glancing down, no need to touch it most of the time. Alternatively I can clip it to the lower left d-ring, but then I actually have to reach down, unclip, read, clip. It's extra work and not worth it unless I am slinging a bottle and the left d-ring is then in use.

If I get stuck using a longer hose (like on my son's reg or a rental) I tuck it in someplace. Its a pain in the butt.
 
Left shoulder so I can glance down and see it.

Sent from my DROID X2
 
I've got to be different. I run it across my chest and clip it to my right chest D ring. Here it dangles the least, and I can see it easily by raising it. Compass use is also quite easy. I have one of those old horkin' big consoles. If I am very close to the bottom (which is quite often) I can slip it under my cumberbun so it won't accidently drag in the sand, silt or on rocks. I also stuff my octo in there as well, so as to keep any possible sand out of it.
 
I think that for newbies, having it in their hands is a good idea. Keeps the unit from dragging into the silt, keeps the gas read-out right in front of their faces, and keeps their hands occupied so that they would have lesser tendency to flap their arms.

For me, my SPG is built-into my computer (air integrated) and it's on my right wrist. The few times that I want to get back to the basics and dive with all analog gauges, then the SPG is clipped to the front D-ring of my crotch strap (I can see it without unclipping it and it's out of the way), compass on left wrist, dive watch and depth gauges on right wrist.
 
+1 for running the hose down my left side, behind my left shoulder and clipping it off (with an attached bolt snap) to the left waist D ring. The D ring is rigged on the waistbelt of my backplate & wing set up.

This system positions the SPG out of the way, yet easily accessible.
 
Left hip on a retractor. And no, I have never had a problem with the retrator.
 
Inside the pocket and extending through a grommet is (GASP) a strong retractor.

I like mine on a Retractor thats made for my left front pocket of BCD.

Left hip on a retractor. And no, I have never had a problem with the retrator.

You're all gonna DIE!!!!!!!!!!!!!

Just kidding. I clip mine (mini SPG) off to a retractor on my left side too. No problems.

Someone mentioned putting it across their chest. To each his own, but I've always refrained from putting anything in a configuration that might slow me down from taking off my BC under water.
 

Back
Top Bottom