Search results

For me it's quite clear an Aqualung Calypso/ Aquarius 1st, '94-97' model or a clone of that model, because the cap is a bit different with it's riffles to what I remember. Everything else is exact that model, so I guess it might be the last model of those Calypso/Aquarius, that's why it shows on...

The reason was probably that their 'Fenzys' had the corrugated inflator hose on the right side. Until 1980 all single hose 2nds of Spiro came from the left. From 1980-1982 some models had the hose connector on the right side, probably for American market where the 'Fenzys' had the inflator hose...

You're mixing that up with the Sherwood Ultima I guess......

Yes, the spring scratched the chrome surface, and the ultrasound cleaner removed it, so you're down to brass.....

Yes, okay, I promise I will never ever again complain about the super boring one-day Level 2 SP Technician Course I have to attend every two years for now 130,- bugs. I was always sure that is a rip off.......

Looks like there are still Service Kits for the SRB3700 available, Order Number 4000-15 If you don't use the reg often and it is stored well, why don't you just give it to a shop for check? There are hardly any parts which degrade in two years when just laying in the closet.

Seems that until the 4th generation the lever was the ....009... parts, but the 5th. generation lever has a different part number ...090.... Shouldn't be difficult for a SP Dealer to get you one...

Sorry guys! Almost missed this one, but was lucky. A 1997 R190 'Blue Dream' (produced in '96), never touched water, and definitely will not as long I own it. I have a couple of these, but this 'brand new' one is of course special. It's a real beauty, isn't it?

....and the newer piston type, if you want to use the 'Cave Cone HP Seat'.......

Right, Bob, forgot about this model..... Anyway, I got me the Scubaclinic tool to try for these cases, but it's a disappointment, it's too short, no stability with the Alan Key inserted. The 'tools' I built me for this work much better, because with the 'tool' fixed in a vise, you can work much...

What Mistral 2nd stage that is similar to a Cressi XS 2nd?!! The Mistral '2nds' have been always DH AFAIK...........

For me the old Apeks TX-ATX and XTX 2nds have a clear design flaw. The guiding of the barrel is much too weak (soft). That's why you are only allowed to tighten the heat exchanger with ridicolous 3Nm-2,2lb/ft. If anybody before has tightened it a bit too much, there is hardly any way to tighten...

For decades I loved to do Deep Air Dives in warm waters from time to time (max. 60 -100 m -200 - 330 feet). I did about 60 of these dives and for me worked best for that purpuse my SP MK20- 25 - D350, whose breathing comfort ( of course especially the D350s) was extremely good at depth. My first...

I suspected rust in the tank as the culprit for this particular problem, because the plastic threads were covered with very fine rust and because it seemed to me it was much too much rust dust there. Normally, if the metal parts are attacked by (salt) water (or dirt with rests of salt water), it...

Did you dive steel tanks in that time? And how looks the filter of your first stage?

I think I have a couple of the ones with the finer texture, they are usually the older ones. but they are anyway often a bit different or just well used.

Interesting find! I've never seen a 156 without CE Stamp, but my ones are from later than '95. Thanks for showing!

You are right, just found one of these 109er with a 5 in the beginning. My 109 from yesterday had a 4 in the beginning (1974) and another with already the D-Clip started with 45, so also 1974 I guess, so I thought it might have been produced only in 1974, but seems that is not true. My 1st...

AFAIK the first109 models used roll pins to secure the adjustment knob. In 1974 the 109er got a slot and a thin clip because there had been too many complains about the roll pin, which got easy bent when installed or lost ( actually there were announced two slots and a clip, but I only have the...

No idea why SP doesn't sell the MK11 Service Kit as MK11/16 Service Kit.......