Search results

I am looking for recent opinions on dive ops. I have dived with the Divers Den in the past. Wondering what has changed in last two years. Thanks.

I have successfully used the GoPro App with an iPad (Gen 3 & iOS 8) and Hero 3. You have the ability to preview the videos and then decide if you want to download them to your iPad using the built-in GoPro WiFi. You can also use as a remote; not sure what the max distance b/w devices is...

The best way I have found is using the same method I was taught with military parachutes, aka rigger roll. Start by (1) folding crotch strap up on backplate; (2) crisscross your shoulder straps-pull one through the other so they are laying on the opposite side; (3) take your waist strap and wrap...

Taken Friday June 12th, 2015 at entrance to what is the parking lot, now underwater. https://www.youtube.com/watch?v=lY6yD0DPU0g

I want to perform a 1.7 Firmware update for my Galileo Luna. I have downloaded and unzip file--Galileo FW 17.ENC. I have Smartrak and a USB IR device. What is the procedure?

I designed a Navboard using AutoCAD 123D (free software) and had it printed using a local printer affiliated with 3D Hubs. It cost me $56.00. I probably should have tried using a CNC for a more durable product. Unfortunately, AutoCAD hadn't released their consumer CNC program yet, and CNC...

David Poyer has four inexpensive novels available on Kindle: Bahamas Blue, Down the Sunless Sea, Hatteras Blue, and Louisiana Blue

Can you add a GPS location as a benchmark for a point of reference?

Board made with a 3D printer using Autodesk 123D Design software. Gauge and compass recessed using DSS mounts. The Scubapro Tec 2G is in gauge mode: stop watch and depth gauge display.

I own triathlon wetsuits (TYR and Ironman), but only use them for tris. The exterior of the trisuits are easily ripped. The general advice for donning is to make sure you trim your fingernails and take care with pulling and tugging. To reduce drag, they are tailored to fit tight (to reduce water...

Here is another map that includes the helicopter. The location of the buoy line (dotted line) has probable shifted.

The attached Powerpoint is about three years old:

For a comparison--I weigh 140 lbs, 5'6" and dive a TLS 350. I use 24 lbs when wearing a 250 wt DUI Thinsulate undergarment with hood and gloves. Six of the 24lbs comes from my backplate. This is also with an AL80 tank.

I'm planning a trip to Panama City Aug 24-30. Would like to know what the shore diving is like and a recommended dive ops. Thank you.

I have a MacBook Pro with the OS X and SCUBAPRO Tec2g. I use JTrak and download using their silver edition USB (2.0) dongle effortlessly. It does not have as many features as SmartTRAK, but there is more than enough for me. I downloaded it from: JTrak

I use an alternate to the spool which is a custom nylon strap. Easier to deploy, but a little more work to recover. Surface Marker Webbing Deployment System - Global Scuba

I had a similar experience. I went to a thinner glove because my drysuit wrist seals felt too tight over the SCUBAPRO glove inserts. But my hands were colder. I'm not trimming my drysuit seals just to accommodate the occasional use of dry gloves. They should make a thicker polypro glove with a...

Aqualung Rocket II are made for military boots and work well with DUI Rockboots: Aqua Lung US - Personal Aquatic Equipment for Personal and Professional Use - Rocket II

The glove-seal goes over the dry-suit wrist seal: http://www.scubapro.com/media/296481/easydon_dryglove-_multilanguage.pdf See Pic 4 on page 4. This is the step where you attempt to pull the glove seal flat. It is probably during Step 3 that I can't get the end of the seal to at a place on my...

I have tried a set and agree. I switched the glove liners to a thinner pair made from polypro. I find it easier to get my dry-suit wrist seal to fit over it. Getting the second glove seal to roll on flat is extremely difficult without the dexterity of an ungloved hand. IMHO, the glove seals are...