pakman
Contributor
[Edited to correct model names and revised pricing]
As I haven't been able to dive much over recent years due to a relocation far away from the ocean, I've decided it's best for me to part with most of my equipment which has just been sitting in storage. I have used them in a doubles setup and the ATX50 for a deco tank, but mostly I have used the one XTX200 with both 2nd stages as my primary recreational kit.
As these haven't been used in awhile, I would strongly recommend having them serviced.
1. Apeks XTX200's (one 2nd stage with the 1st stage Yoke). 1st rev/ polished chrome. Will include a 29" reg hose and LP inflator hose. Can include DIN adapter if needed.
Asking for $350 plus shipping
2. Apeks ATX200 (one 2nd stage with the 1st stage DIN). This has the older 1st stage model. The 1st stage has 1/2" LP port and the 29" hose that connects to the 2nd stage has a 1/2" size. I will include a 1/2" to 3/8" adapter. Will also throw in a LP inflator hose. Can include Yoke adapter if needed.
Asking for $250 plus shipping
3. [SOLD] Apeks TX50/ DST. This was used for a deco tank and very sparingly used. LP hose is about 38". Will throw in the SPG on the short HP hose if needed.
Asking for $150 plus shipping [SOLD]
I've also got a 7' ft long hose as well if you're interested.
Shipping $15 each within continental US by USPS Priority mail (can work out something if purchasing multiple items). Paypal accepted. Pickup available in Pittsburgh area.
As I haven't been able to dive much over recent years due to a relocation far away from the ocean, I've decided it's best for me to part with most of my equipment which has just been sitting in storage. I have used them in a doubles setup and the ATX50 for a deco tank, but mostly I have used the one XTX200 with both 2nd stages as my primary recreational kit.
As these haven't been used in awhile, I would strongly recommend having them serviced.
1. Apeks XTX200's (one 2nd stage with the 1st stage Yoke). 1st rev/ polished chrome. Will include a 29" reg hose and LP inflator hose. Can include DIN adapter if needed.
Asking for $350 plus shipping
2. Apeks ATX200 (one 2nd stage with the 1st stage DIN). This has the older 1st stage model. The 1st stage has 1/2" LP port and the 29" hose that connects to the 2nd stage has a 1/2" size. I will include a 1/2" to 3/8" adapter. Will also throw in a LP inflator hose. Can include Yoke adapter if needed.
Asking for $250 plus shipping
3. [SOLD] Apeks TX50/ DST. This was used for a deco tank and very sparingly used. LP hose is about 38". Will throw in the SPG on the short HP hose if needed.
Asking for $150 plus shipping [SOLD]
I've also got a 7' ft long hose as well if you're interested.
Shipping $15 each within continental US by USPS Priority mail (can work out something if purchasing multiple items). Paypal accepted. Pickup available in Pittsburgh area.