DIY Canister Kit Round 2

[rescue15]

I have for sale the parts to make 4 battery canisters. The kit includes a canister made of schedule 120 PVC pipe, dark gray in color. It will have a PVC plug glued (cold weld) on one end. A top cover made of solid 1 inch Poly carbonite clear plastic, professionally machined to fit the open end, and all the necessary o-rings to seal the canister and modified M@G light.

The canister will be shipped ready for your finishing touches...adding your gland, draw latches, switch, or whatever you want to do to it. The kit does not include any of these parts, just the canister, lid and o-rings


The canister fits this battery... http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=2219

Canister cost shipped to your door on the continental US via USPS Priority mail is $75.00.
(This price is a little higher because I wasn't able to get the same price as the first round. Sorry)


I NEED A COMITTMENT FOR 5 ORDERS BEFORE I CAN SHIP TO MEET MINIMUM SHOP REQUIREMENTS FOR THE LID


Thanks
Steve

 

[rescue15]

This is what you will get...
**2 each buna -N o-rings in sizes 227, 134 and 124
**canister made of sched 120 PVC Pipe with sealed base. dimensions are ID 2 3/16 inch, OD 2 13/16, 7 2/8 long (inside depth is 6 7/8 inches)
**lid made of 1 inch poly carb clear plastic, custom machined to provide snug fit in the top of the canister.
( ++++The lid in pic is a prototype. The one you will be getting will be machined from one solid piece of clear poly. I will post a pic when I get the first batch next week.+++)

 

[OUScubaGrad07]

any chance you are going to do a DIY kit for video cameras? I'd definitely be up for that! Doesn't need controls or anything...just something i can hit record top side, get in and turn it off after the dive.

 

[rescue15]

sorry, no camera housings...too many variables and things to go wrong.

Steve

 

[rescue15]

bump it up