happy-diver
Skindiver Just feelin it
- Messages
- 5,326
- Reaction score
- 4,790
- # of dives
- 2500 - 4999
I'm taking up drinking
First BPW assembly issues
- Thread starter sandyletu
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
That is my excuse.
Eric Sedletzky
Contributor
I want to see how many pages this will blow out to. You guys do know that the poodle jacketers are laughing at you right now, right?
Carlos Danger
Contributor
I would ditch the book screws and just use two regular STA bolts. Center hole on your BP through the webbing grommet and top hole in your wing. You may need to pre-soak the webbing to stretch it into alignment. If you are not using an STA, then you may also need to play around with bolt lengths and/or use spacers to keep things from protruding:
Attachments
Similar threads
