Hi, what's the optimal port for the Canon 15mm fisheye lens + Metabones IV adapter inside an Ikelite A7R II housing and the 8-inch dome? Ikelite only lists the Sigma 15mm fisheye lens + Metabones on its website and I think the Canon lens is a few millimeters shorter? Thanks a lot for any help.
Ikelite port for Canon 15mm fisheye + Metabones IV in A7R II housing?
- Thread starter Swordfish
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Ikelite Staff
Contributor
Sorry for the delay in response. The best thing to do is to measure the lens length with adapter attached, from the lens mounting point. Then, refer to our port page to select the proper 8-inch dome kit to allow for the added lens length inside the dome: Ikelite | DSLR Lens Ports
Best Regards,
Brett Foster - Ikelite
Best Regards,
Brett Foster - Ikelite
Similar threads
