• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Polartec vs Thinsulate

Discussion in 'Exposure Suits' started by Texass, Dec 5, 2004.

  1. Texass

    Texass Manta Ray

    678
    0
    0
    I'm assuming there isn't a big difference between the 2, but I don't really know. So I'd like a little input from some of you who actually do know. The water temps I'm looking at were in the upper 40's last winter.

    Texas LDS's don't offer much for drysuit divers, at least not in my neighborhood. Everything I've asked about so far isn't stocked and is only available by special order. Basically I get shown a catalogue picture. That means I'll be stuck with what arrives.

    In case it matters I'm diving an Andy's DS3. Last year I used thermals, jeans and a sweater. I also have a pair of Polar Bear woolies, but they are just too bulky and interfere with my shoulder dump valve.

    Thanks,
     
  2. jonnythan

    jonnythan Knight Scublar ScubaBoard Supporter

    # of Dives: 200 - 499
    Location: Upstate NY
    10,060
    109
    0
    There's a gigantic difference. I recently went from 200 weight Polartec to Diving Concepts' Thinsulate Extreme. I only actually have one dive on the new suit, but it was significantly warmer than the Polartec without being any bulkier. If you want to try 300 weight fleece, www.softweardiving.com will hook you up with that (full custom for $170). It might be enough for the upper 40s.
     
  3. Night Diver

    Night Diver Solo Diver

    74
    0
    6
    I've got a 300-weight fleece from Janice, it's great but I don't think it would be warm enough for 40's for most people. I am OK down to 50-51 but if I was going to dive in the 40's I'd need another layer or a WHOLE lot of air in the suit.

    The usual line you hear on this stuff is that Thinsulate doesn't lose much of its insulating quality when it gets wet. Of course if I get wet I'm coming up straightaway so unless I was planning a deco dive in 40 degree waters I'd probably just layer up.
     
  4. Far_X

    Far_X Solo Diver

    # of Dives: 200 - 499
    Location: Redmond, WA
    726
    0
    0
    I am currently wearing Under Amour Cold Gear with my dry suit. Ok, it is not designed for diving (mainly for snowboarders) but it is very thin and my last dive was 49F. I noticed the cold when I first jumped in the water but wasn't shivering or anything like that and soon warmed up once my buddy joined me and we started moving. I am not too sure how cold I can go with it but it is easily available.
     
  5. bertschb

    bertschb Barracuda

    # of Dives:
    Location: Oregon - USA
    296
    2
    0
    I have both materials in custom fit DUI suits. I get cold easily while diving here in the northwest. Water temps are around 50 degrees in the winter. My dives are usually 60-70 minutes long (E8-130's) and I'm pretty cold by the end of the dives with my DUI Polartec suit. I even add a polartec vest and two pairs of socks with the suit and still get cold. My Thinsulate suit with Thinsulate socks keeps me warm on the same types of dives.

    The main difference for me is comfort and maintenance. The Polartec is very comfortable and I just throw it in the wash after each dive. The Thinsulate suit does not stretch and you can't wash it easily (I really hate that part). I usually just use the Polartec suit in the summer when it's warm topside and then switch to the Thinsulate in winter.

    But remember, I'm cold blooded.
     
  6. ChrisA

    ChrisA Loggerhead Turtle

    # of Dives: 200 - 499
    Location: Redondo Beach, California
    1,301
    1
    0
    Thinsilite is warmmer for a given thickness. The fibers are a smaller diameter so they can
    pack more fiber into the same thickness of fabric and still hace airspace between the fibers. It's the airspce that makes the insulation.


     
  7. Bob3

    Bob3 Dive Shop

    4,111
    12
    38
    Ditto on most of the above , plus there's less compression with the Thinsulate, translating into less loft/air needed in the suit.
     
  8. Robert Phillips

    Robert Phillips Solo Diver

    # of Dives: 200 - 499
    Location: OC, California
    1,458
    0
    0
    Is that all you wear under your suit? I use it under my DUI 300wt fleece as underwear along with a rashguard (surf type) polypro top. I think I would get very cold with just UnderArmor under my suit!
     
  9. hardhat

    hardhat Nassau Grouper

    181
    0
    0
    Polar fleece cold. Thinsulate warm. These are the only things you need to know. Polar fleece is okay under a neoprene suit, use it under a bag suit and you'll eventually freeze to death. Thinsulate will keep you warm, to warm for neoprene. Oh and the higher the number rating for thinsulate means the warmer you'll be. Does that make sence?
     
  10. jagfish

    jagfish The man behind the fish ScubaBoard Supporter

    3,569
    1
    0
    It's a shame Thinsulate is just such a pain to care for: no detergent, no dryer, best to dry laying down....
     

Share This Page