Razor Sidemount kit. $400 + $30 shipping
(very light use)
-I believe this is the 2.0 version, but I've improved it by adding X DEEP weight pocks along the back of the waist belt and on the spine. I found this 10x better than having to thread in weights, especially if you didn't own weights or the weights you got were the mesh bag type.
-Light use, webbing is generously cut for something 230lb, 6'5 in an 8mm suit, so should fit/be adaptable to most people.
-Also includes custom made Stainless Steel tank bands and tool for tightening them.
-Butt pocket also included.
-------
Scubapro X-Tek backplate and wing setup. Fully kitted out excellent setup. $700 + $40 shipping
(pics upcoming or available by request. Lightly used set, no notable wear)
-This has been my favorite and most comfortable diving setup. I liked it more than the Form harness because of the way the straps follow your body contour back to the plate.
-Scubapro Steel backplate with sleeve/pocket
-Pure harness
-30lb single wing
-STA with Scubapro buckle tank straps
-Trim weight pockets
-Scubapro quick release weight pockets.
----------
I will also be listing a pair of mk25/a700's that are used but fully functional. Also my favorite regs. the MK25's work well for either back mount or sidemount and the A700's are wonderful regs with all metal casings that add a little moisture to the breathing air.
------
Fred T XL Stainless Steel backplate. $80+$20 shipping
I don't remember the name of the guy who use to make these there, but this is his extra long steel backplate. Great for taller people, especially those who need a lot of weight due to water temp/tanks/suit, etc. Pics available
(very light use)
-I believe this is the 2.0 version, but I've improved it by adding X DEEP weight pocks along the back of the waist belt and on the spine. I found this 10x better than having to thread in weights, especially if you didn't own weights or the weights you got were the mesh bag type.
-Light use, webbing is generously cut for something 230lb, 6'5 in an 8mm suit, so should fit/be adaptable to most people.
-Also includes custom made Stainless Steel tank bands and tool for tightening them.
-Butt pocket also included.
-------
Scubapro X-Tek backplate and wing setup. Fully kitted out excellent setup. $700 + $40 shipping
(pics upcoming or available by request. Lightly used set, no notable wear)
-This has been my favorite and most comfortable diving setup. I liked it more than the Form harness because of the way the straps follow your body contour back to the plate.
-Scubapro Steel backplate with sleeve/pocket
-Pure harness
-30lb single wing
-STA with Scubapro buckle tank straps
-Trim weight pockets
-Scubapro quick release weight pockets.
----------
I will also be listing a pair of mk25/a700's that are used but fully functional. Also my favorite regs. the MK25's work well for either back mount or sidemount and the A700's are wonderful regs with all metal casings that add a little moisture to the breathing air.
------
Fred T XL Stainless Steel backplate. $80+$20 shipping
I don't remember the name of the guy who use to make these there, but this is his extra long steel backplate. Great for taller people, especially those who need a lot of weight due to water temp/tanks/suit, etc. Pics available