Jeremy Williams
Contributor
Three 'normal' low pressure hoses for second stage regulators from Scubapro with 3/8-inch male to 1st stage and 9/16-inch female to 2nd stage. I say 'normal' because Scubapro uses a spline nut instead of a typical hex nut on the connection to the second stage. These have the Scubapro hose protectors intact on each end. Cure codes for the three hoses are 03-18, 09-19, and 31-19.
Also included are two brand new Scubapro mouthpieces with Scubapro mouthpiece clamps.
All 7 parts were removed from brand new Scubapro regulators and none of these items have ever been in the water. So this is the stuff you'd get if you ordered a brand new regulator set from Scubapro.
So, let's say that the retail value of the hoses is maybe $25 each and the mouthpieces are maybe $15 each... I don't really want to sell these one at a time. How about $50 for the lot and I'll cover postage within the continental US?
Also included are two brand new Scubapro mouthpieces with Scubapro mouthpiece clamps.
All 7 parts were removed from brand new Scubapro regulators and none of these items have ever been in the water. So this is the stuff you'd get if you ordered a brand new regulator set from Scubapro.
So, let's say that the retail value of the hoses is maybe $25 each and the mouthpieces are maybe $15 each... I don't really want to sell these one at a time. How about $50 for the lot and I'll cover postage within the continental US?