Closed Single Tank Wing - 25-30 lbs

[tblanks17]

Looking for a single tank wing with 25-30 lbs of lift. Would prefer a regular elbow into the wing, not a pull dump on the inflator hose.

Feel free to Pm to discuss.

 

[runsongas]

if you don't get any offers, the dgx is still a great value

DGX Gears S1 Singles Wing

Featuring a narrow low profile donut design with a lift capacity of { 30 lb | 13.6 kg }, the DGX Gears S1 Single Tank Wing is a perfect fit for AL80 / LP80 / LP85 / HP100 cylinders and it can be matched with any standard metal backplate and webbing harness.

www.divegearexpress.com

 

[tblanks17]

if you don't get any offers, the dgx is still a great value

DGX Gears S1 Singles Wing

Featuring a narrow low profile donut design with a lift capacity of { 30 lb | 13.6 kg }, the DGX Gears S1 Single Tank Wing is a perfect fit for AL80 / LP80 / LP85 / HP100 cylinders and it can be matched with any standard metal backplate and webbing harness.

www.divegearexpress.com

Thanks! Yes I am leaning towards the DGX wing, but wanted to see if there was anything out there.

 

[mattfish]

I have an extra Mares XR single tank donut, but it is 22 pound lift, so a little short of what you’re looking for.

I have this extra because I ended up buying one for a trip while this wing was getting its shell replaced by Mares (A seam in the shell had separated, but the bladder was fine), it was bad timing and I now have 2. Feel free to message me if you’re interested or don’t find anything better.