out of nowhere, the computer logs a delayed viaotion 60 foot. it makes it look like i went from what ever depth i was at directly to the surface then back down in less than 15 seconds. I sent my T3 back twice for this problem. Both times the service folks were very pleasant, but said tis a 1 in a million problem. Guess I should play the lottery because I had it happen twice and my buddy had the same failure, right out of the box on dive 3.

Next problem I had after repair 2 was lost link elevation errors. It would trip to an elevation dive at 1,500 feet, but not rest back to elv 1 until I went to 500 feet. Went back again, and was replaced.

Yesterday 30 minutes into the dive the link was lost and stayed lost for 15 minutes. Thank fully I’ve now stared to dive with a backup computer. Left the unit sit on shore with the computer attached to the BCD. Showing 000 psi for 10 mins. Then out of the blue it started showing pressure again. I’m waiting to hear form tech support on the latest failure.

no the battery reads good. 1st thing i thought. but no battery warning occured and sitting here right now it says battery is good. FYI temperature reading is off by nearly 15 degrees. computer says my dive yesterday was 61 degress. but three others say it was 48.

Thinking its time to buy a UWATEC