Aeris A-1 torque specs

[Fundive123]

Hi, I recently bought a Aeris A1 regulator with matching octo. I was wondering what the torque specs were for attaching the LP hose to the first and second stage, and a HP hose to first stage? It's my understanding that the second stage to LP hose O-ring should be lightly greased, but is a light amount of christo-lube mcg 111 needed/advised on the LP and HP hose O-rings attaching to the first stage? Thanks in advance.

---------- Post added October 30th, 2013 at 08:53 PM ----------

After a lot of looking online I found the Aeris A1 first stage torque specs. Can't wait to use the reg!

 

[NCadiver]

Get a better regulator a balance 1st and 2nd, also for these water a sealed systems is better. Aeris has a 30 day satisfaction get the ION or something else.

 

[Fundive123]

Hi, and thank you for the advice NCadiver. I went with a Aqualung Titan and my fiancee with the A1. With the amount of dives we would/plan to do this year, it seemed cheaper to buy the regs than renting. We figured we would start with "entry/inexpensive" regs and figured in a year or two if we are still enjoying scuba as much as we are now, then we will both upgrade and keep our current regs as spares.