AquaFlex vs. HydroFlex

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Ron SD

New
Messages
3
Reaction score
0
Location
San Diego
# of dives
0 - 24
I am trying to decide between a 3mm AquaFlex or 3mm HydroFlex for a trip to the western Caribbean at the end of September. What is the difference between them?

And would either of these be warm enough given that I use a SolaFlex 7/8 for diving in Southern California waters?

Thanks!
Ron
 
Hi Ron,
The Aquaflex suit is warmer because the seams are glued and blind stitched and prevent water entry.
The Hydroflex suit uses a flatlock seam. The difference is noticeable. Which one is best for you depends upon the specific temperatures as well as your personal tolerance for cold. When in doubt, error on the warm side and get the Aquaflex. If you're too warm, you can always unzip it during the dive. If you get the Hydroflex and you are too cold, you could be miserable.

You may want to write to the resort destination that you're heading to for further advice. Good luck
 

Back
Top Bottom