- Subconn E/O connector source?
- Filling Tanks...
- Building air pressure scooter?
- Need A Source for Fittings
- OK, lets build a scooter....
- jet fins spring strups - some questions of details
- DIY O2 Blending...
- caps
- DIY spring straps for Twin Jets
- DIY Tank Holders - Cheap, Easy, Quick
- canister light idea
- Fixing a Wet Suit
- Sewing webbing ?
- Thread for sewing to BC?
- DIY DPV Motors
- O2 Analyser PM with Low Batt indicator
- Spring Straps
- Dive Slates
- BCD Grommets
- Attaching hoses to First Stage
- Magnehelic gauge hose configuration
- Where can I find a Wireless transmitter??
- 1st stage hose attachment
- An easy ScubaPro question
- home made video lights , flash.
- Battery packs
- EANx OMS/Nitek dive computer download hack?
- Designing a fail-proof technical snorkel keeper...
- DIY back plate
- DIY backup light?
- Where can you find an MR16 bulb socket?
- looking for tranning mpg vidoes
- Helios 9 bulbs
- machine shop at home
- dpv
- Shears
- Fuse or Circuit breaker on diy canister light?
- Looking for Apeks rebuild kits
- Canister Light Cable Strain Relief
- Neoprene 5mm by the sheet?
- I'm looking for video light/flash arms
- DIY canister light, costs and where to start?
- Building a Better Mousetrap (O2 Analyzer)
- DIY Website
- DIY Dive flag/float
- Scuba Tank Stand
- E/0 wetmate connectors
- New Surface supplied air system
- DIY Tank Tumbler
- Cracked Strobe Housing
- DIY Depth Gauge?
- Completely Sealed light charging with a diode
- Dry suit dryer for the non DIYers
- SUUNTO computer to Palm pilot upload
- intermediate pressure
- Cave Diver Lights - Canister
- DIY Canister Light and Lighthead
- SMB carrying sleeve
- Test tube sources
- Questions About Making A Reel
- Fill your own tanks
- I love how this new forum is already populated
- lights
- ???
- Questions about building my own spool.
- DIY dive gear successes and failures
- do it your self ??
- Learning to work on gear:
- which work bench
- O-ring tool
- I'm building a save-a-dive kit
- Do It Yourself DIR Knife and Sheath
- SCUBA Trailer
- DIY O2 analyzers:
- Rigging a small boat for diving
- Building Scooters
- Stewart Warner/Kidde Compressor and moisture seperator questions (Home mixing)
- P-Valve Plans
- Group buy on parts for O2 analyzer?
- The Ultimate at home repair bench
- DIY Equipment
- Save a dive kit
- Anyone know where to find Apeks Reg Parts?
- Continuous blending questions
- How to get hose protectors on?
- Parts source for TUSA
- Self Service / Inspection on Equipments ?
- Lubricating O Rings
- Anyone know how to make a portable gear hanger/washer
- Spare parts
- Air Compressor
- Excenter locks
- When making your own weights, but the lead shot in plastic first?
- How do these come off?
- save a dive goodies...
- How to extract an oring
- Home filling station pondering....
- A great solution, I just don't know what the problem is...
- Homemade Soft Weights
- Working on own equipment
- Do It Yourself Kit
- Cleaning Rust Off a Dive Knife
- Filling station
- Spool, homemade?
- Oxy-tester.... umakeityourself...
- Home built spear gun.
- servicing own gear
- self maintenance of MY equipment......