How to plug Thermo manifold?!?

[OKDIR]

I am thinking about getting the manifold that was posted under the gear section that they have on ebay and was wondering if you guys know how the penny plug method works? I thought there was another post on here that told how to punch out a penny then flatten it out with a hammer???? to use as a noblow.

If I want to use a noblow, should I use a penny, SS disc or double disc??

I want to use it on this manifold.

If any of you are interested in a like new o2 leaned thermo 200 bar manifold with yoke inserts, you may want to take a look at this one.

http://cgi.ebay.com/ws/eBayISAPI.dl...item=1843373974

[WYDT]

Originally posted by OKDIR
I want to use it on this manifold.

If any of you are interested in a like new o2 leaned thermo 200 bar manifold with yoke inserts, you may want to take a look at this one.

http://cgi.ebay.com/ws/eBayISAPI.dl...item=1843373974

Skip the 200bar and order a 300 Bar from Divers Supply (Sea Elite). It's the SAME EXACT manifold as the Halcyon but for only ~$160.

You won't need the yoke adapters on doubles and the 300bar din will allow you to screw your din regs all the way down into the manifold not leaving exposed threads and creating another place to catch line.

As far as plugging them go I would either just double the disks or use a ss shim from someone who knows what they are doing.

"punch out a penny then flatten it out with a hammer"? :confused:

If you're going to do doubles do them right.

DSAO!!