Sherwood Wisdom QR oring size

kb2ehj · Jan 10, 2006

Hello all,

Does anybody know the dash size for the oring that goes on the stem that sticks into the dive computer? This is using the sherwood hose with the quick disconnect.

I emailed sherwood and there response was not everyone uses DASH size orings so order it from us at several dollars per oring. I know the answer was total BS so I figured somebody here might have the size.

Thanks Mark

SCUBA-J · Jan 12, 2006

The o-rings are common SCUBA o-rings. 1- is G011B (sherwood part #) its is the same o-ring used on the port plugs and the other is used on just about every HP spool(sherwood part # 2426).

kb2ehj · Jan 13, 2006

SCUBA-J:
The o-rings are common SCUBA o-rings. 1- is G011B (sherwood part #) its is the same o-ring used on the port plugs and the other is used on just about every HP spool(sherwood part # 2426).

Yeah I've been given the Sherwood p/n's but I'm not going to spend the 'high dollars' on there o-rings when I can get the same thing from an o-ring company for pennies each.

I've got a bunch of the 003 rings but they look way to small to fit around the stem. Icould be wrong and I don't wan't to take off the one that is already in place to try it.

Thanks for the help

Sherwood Wisdom QR oring size

Please register or login

kb2ehj

Contributor

SCUBA-J

Guest

kb2ehj

Contributor

Similar threads