What type of tank bands to use

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

kiwijohn

Registered
Messages
8
Reaction score
0
Location
Australia
At present I use steel bands, but as I use the same tanks for single and independents, I am finding it a little annoying/time consuming changing them over.

Does anyone use cloth tank bands when using twins, how do they compare to standard stainless steel tank bands? Do you have any problems to do with stability?

Thanks

John
 
Are you manifolding the tanks when you double 'em up or keeping them independent? If you're manifolding, then stability of the doubling hardware is extremely important, and I would not recommend any of the less robust (than steel bands) arrangements. If you're keeping them independent, there are several offerings - haven't seen the one I use in a few years (I wouldn't recommend it anyway), but Dive-Rite has one that looks pretty good (though I have no personal experience with it).
http://www.diverite.com/products/gas/ind_dbl.htm
Rick
 
I have seen the bands that DiveRite sells for independent dbls. I believe that they are designed/made by Dan Berg. He also makes the "Ultimate Pony Tamer."

Robert

:doctor:
 
At the above link you will have to go Accessories, then twin set kits.

Sorry about that

John
 
All,

I'm looking at this at the moment and I'll probably just get 2 STA's and bolt them together with SS eyelet bolts inbetween - this is essentially what DR use and what I've seen numerous people here use.

This system works fine for independants - the guys here use it for cave diving, wreck diving etc. The DR one was used on DR's trip to the Nullabour (see their web page).

Hope this helps - Dave.
 
What method does the Dive Rite setup use to connect the twins to the BCD? I can see how they connect the tanks together, but what sort of attachment do they use to interface to the harness/BP?
 
https://www.shearwater.com/products/swift/
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom