Setting up octo+pressure gauge+bc inflator
- Thread starter NYCDVR
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 3,138
- Reaction score
- 4
What reg?
Kray_Z
Guest
if you mean placement.. like what goes on each side.. its (looking from the back of the bc) primary and backup on right/ spg and inflator hose on left...
if thats not what you meant sorry
hope it helps
if thats not what you meant sorry
hope it helps
Kray_Z
Guest
oh and i forgot to mention to make sure you are only using the HP ports for the SPG.. my uncle made that mistake and coulnt figure out why he kept blowing o-rings
Kray_Z:oh and i forgot to mention to make sure you are only using the HP ports for the SPG.. my uncle made that mistake and coulnt figure out why he kept blowing o-rings
What was he hooking up to the HP port?
Kray_Z
Guest
not sure.. i think either a reg or a lp inflator hose... he just hadnt done it in a while and forgot to check for which one was which at least he checks it before he gets in the water
at least he checks it before he gets in the water Similar threads
