In need of some help

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

300bar

ScubaBoard Supporter
ScubaBoard Supporter
Scuba Instructor
Divemaster
Messages
7,433
Reaction score
107
# of dives
5000 - ∞
On the inside of a LP inflator hose there is a small o-ring.
After a few (hundred) dives the o-ring is worn out.
With a needle you can very easely remove this ring,
But how the hack can you put one back in in a short time.
I have done this a few times now but it takes a long time fiddling about:D
Anyone please know a quick way:coffee:
 
Suggest you make a "bushing tool". Would require machining a plastic dowel with small diameter approx equal to the inside dia of the O ring and outside diameter slightly smaller than the O ring OD.
www.scubatools.com
 
https://www.shearwater.com/products/teric/

Back
Top Bottom