Fitting dry-suit braces

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I

Irish-Diver

Registered
Messages
12
Reaction score
0
Location
Galway, Ireland
# of dives
500 - 999
Hi,

I bought a set of braces for my dry-suit and now need to fit them. It's your normal membrane drysuit, nothing fancy. My question is what sort of glue should I use? I know the recommended two part glues is what most people are going to answer with but can I use normal superglue? It's not like it needs to be sealed up or anything?

Cheers,

Thomas.
 
First of all I will translate a bit for others. Braces are suspenders on this side of the pond. :D

I wouldn't use superglue sense they contain some nasty stuff. Also most get rather brittle after drying. I used Aquaseal on mine and they have held since. Probably any type of contact cement would do the same, especially the water based ones.
 
You must log in or register to reply here.

Similar threads

T
Question Glove and pee systems
4 5 6
Replies
52
Views
2,136
JoeTPhilly
J
gerj
Factory-fit vs aftermarket dry gloves?
2 3 4
Replies
30
Views
993
rob.mwpropane
rob.mwpropane
A
Question Check before buying Seasking Drysuit
2 3 4
Replies
30
Views
1,120
admikar
admikar
R
Question When to Repair Drysuit Seam
2
Replies
18
Views
733
TrimixToo
TrimixToo
Tassie_Rohan
Reinforcing a trilam drysuit
2
Replies
12
Views
1,180
admikar
admikar
https://www.shearwater.com/products/swift/

Back
Top Bottom