Aeris Atmos 2 Battery

[Cobra852]

I'm having fits :shakehead changing the battery on my Atmos 2. I have the black ring off now I'm confronted by the clear cover with a very small black ring around it. I can't seem to get it off. I'm hesitant to try prying anymore in fear of damaging the clear battery housing. Anyone know the secret of opening this?

[Doug Krause]

Give David, Mark or Ron a call in our Customer Service Department - 800-435-3483.

[m3830431]

Been there done that. Once you do it the fear is gone. You need a pick like the dentist uses to pry the battery cap off. It inludes the O ring, that is the scary part. Once there it is a piece of cake. To reassemble you have to compress the battery cover and O ring. Sometime it takes three hands

[Scuba.com]

The clear cover will just pop off once you break the seal. Use caution as you put the o-ring and cover back on. The cover and oring has to snap into place and be flush. Make sure the oring has not extruded. Try placing the black locking ring over your thumb so as you press down on the clear cover all you have to do is slide the ring over the thumb while it applies pressure. Then while keeping the pressure on the clear cover use the tool to lock the black ring in place.