please check this

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

OceanicRocks

Guest
Messages
209
Reaction score
0
can you guys please look at these pics below and tell me if you see anything that needs adjustments. The first set of pics is my delta fdx10 conections on my fis stage... I am used to the "X" configuiration on the port connections and when you look at it directly above the tank it forms more like a "Y"... tofurther clarify this you will see in 4.jpg photo below on the left the conections are up and down and on the right they are right left... also the second stage connection into the first stage is further from the back of my head and the octos connection is closest to the back of my head. should this be changed or is this a good connction???

the second question that I have is with the second set of pictures of my zeagle stiletto BCD... in the pictures you will note tha the shoulder straps only have 3" of adjustment left... the pocket position is what I'm a bit concerned aout. As you may know the zeagle pocketsare already designed a bit further back than most other BC's and so having them adjusted lower on the hip is critical. do you seethe pocket position as too high in the pistures shown below? thanks



http://i8.photobucket.com/albums/a9/CORALCRAZED2004/7.jpg
http://i8.photobucket.com/albums/a9/CORALCRAZED2004/6.jpg
http://i8.photobucket.com/albums/a9/CORALCRAZED2004/5.jpg
http://i8.photobucket.com/albums/a9/CORALCRAZED2004/4.jpg

http://i8.photobucket.com/albums/a9/CORALCRAZED2004/1.jpg
http://i8.photobucket.com/albums/a9/CORALCRAZED2004/2.jpg
 
You can switch the hoses on the FDX10, but the way they're setup now you probably won't notice the difference. It will work fine in either position, the thing you need to watch for is hose length. If your second stage keeps getting pulled out of your mouth because the hose is too short, you may be able to solve the issue by changing the hose position. But it's only about a 1/2 inch different.

Did you assemble the regs or did you have a shop do it? If you did it yourself, did you put a small amount of silicone on the o-rings before assembly?

The BCD looks like it is adjusted fine and it's the right size.
 
can you guys please look at these pics below and tell me if you see anything that needs adjustments.

Your 7' hose looks too short!

:D
 

Back
Top Bottom