Mares R2 Rebel Regulator

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Spencermm

Contributor
Messages
2,049
Reaction score
7
Location
Southeast Texas
# of dives
0 - 24
Can anyone who owns one comment on this regulator?
Thank you,
Spencer
 
Can anyone who owns one comment on this regulator?
Thank you,
Spencer

They are a very simple, robust reg. For recreational diving in water above 50 degrees F they are a great value. The first stage is an unbalanced piston design, so the regulator's intermediate pressure will slowly fall as the cylinder pressure goes down. This means that the reg's inhalation effort will be slightly more difficult at lower tank pressures than it was at the dive's start.

Dive buddies and I have long used the R2 Axis (an earlier version of the Rebel) for decompression cylinders. I once tried to overbreathe one while in a cave at 110ffw or so. All I succeeded in doing was to waste some gas.

I have serviced several of them, and they are extremely easy to tune.


Greg Barlow
Former Science Editor for Rodale's Scuba Diving Magazine
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom