AERIS Regulator First Stage Recall/Retrofit

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Doug Krause

Contributor
Messages
1,289
Reaction score
72
Location
San Leandro, California (just south of Oakland)
AERIS has been notified by its supplier (ROMI, Ent.) that they have received isolated reports of AT400 type Regulator First Stages exhibiting uncontrolled flow of air to the Second Stage.

Evaluation has shown that a specific batch of HP (High Pressure) Seats contained material that can deteriorate and fail to properly perform its mechanical sealing (shut off) function, causing an uncontrollable free flow which could result in serious injury to or death of the user.

In cooperation with the U. S. CPSC (Consumer Product Safety Commission), ROMI is initiating a voluntary recall of all affected AT400 First Stages.

The affected First Stages include those that were shipped to AERIS Retailers from the factory between May 1, 2006 and November 15, 2006. Other Diaphragm type First Stages that received annual service between May 1, 2006, and October 22, 2007, may also be affected.

NOTE: Due to the random nature utilized to assign SNs (serial numbers) to First Stages, there is only a small quantity of affected units within the large range of SNs. Since the extent of listing the actual SNs of all affected units would be impractical and not user friendly, AERIS has created a data base on the diveaeris.com web site that product owners and retailers can easily access to determine whether a specific First Stage is affected and if it has received the retrofit.

Determine whether your first stage is affected.
Locate an Authorized AERIS Dealer closest to you.
Instructions for returns direct to the factory.

If you have an affected unit, you must discontinue further use of it and take it to the AERIS Dealer where you purchased it, or a local Authorized AERIS Service Center, for a component retrofit at no charge.

Should you have any questions, please contact our toll free Recall Help line at (888) 636-9390 or locally at (510) 639-5448 between 8 am and 5 pm Monday through Friday Pacific Time.

If you no longer own the Diaphragm type Regulator First Stage, please forward this letter to the new owner or have them contact us directly.

WARNING: DO NOT CONTINUE USE of the Regulator First Stage until it receives a Retrofit. Only Authorized AERIS Dealers and their trained service technicians must perform this Retrofit. Non authorized persons who attempt the Retrofit procedure risk voiding the product’s warranty and rendering the product dangerously unsafe for SCUBA use.

Thank you for your cooperation.

Sincerely,

AERIS Technical Support
 
https://www.shearwater.com/products/teric/

Back
Top Bottom