June 2nd, 2008, 11:39 PM
I have been offered a job in At Taif and wondered if anyone on here worked either here or Jeddha and goes diving in the Red Sea? I am after information as to the set up there whether you have formed a club or if you dive with a local shop. Any information welcome as i am trying to gather as much info poss before making a decision.
September 4th, 2008, 03:54 PM
I have been trying to get an assignment on the Typhoon Program with BAE in Taif. Did you take the job? Email me directly.
Resume (CV) on-line at: cjhunter(dot)com/PW018390
Senior Designer: Composite Airframe Structures Tool Design, Primary and Secondary Structures, Major Assembly Jigs
No Travel Limitations, Strictly Aerospace, 25+ years of Airframe & Tool Design
25,000 Hrs CATIA (V3, V4 & V5), 8,000 Hrs Unigraphics II (V9, V11, V13 & V16), 10,000 Hrs on the Board ? 2 Years of Airframe Structures & 21 Years of Tooling
7-07 to Present ? CATIA V5 Senior Tool Designer ? Contract with Lockheed Martin Skunkworks ? F35 Program - Large Airframe Autoclave Bonding Jigs
7-06 to 7-07 - CATIA V5 & V4 Design Engineer ? Contract with PDS Engineering, Seattle ? 787 & 747 Programs ? Overhead Handling Fixtures ? Transportation & Positioning Dollies for Major Airframe Sections
6-05 to 6-06 ? CATIA V5 Design Engineer - Contract with Goodrich Aerostructures ? B787 Program - Tool Design? MBD/FT&A - Airframe Assembly & Composite Tooling
3-05 to 6-05 ? CATIA V5 Design Engineer - Contract with Northrop Grumman ? F-35 Program - Tool Design? Airframe Assembly & Composite Tooling
11-04 to 2-05 ? CATIA Design Engineer - Contract with Kaiser Compositek ? Secondary Structures - Honeywell TFE731-50 Engine Fan Duct ? Composite Engineering - Complex Surfacing & 30+ Sheet Drawings
3-04 to 10-04 - Sr. CATIA Design Engineer - Contract with Aurora Flight Sciences - Global Hawk UAV Program ? Composite Tool Design - Invar & Graphite Composite Curing Fixtures ? Trapped Silicone Bonding Jigs ? Complex Surfacing
8-03 to 2-04 - Sr. CATIA Design Engineer - Contract with Composite Structures LLC - Apache and Hawker Programs ? Autoclave Tools - Bonding Jigs ? Router Templates - Filament Winding Mandrels - RTM
10-02 to 7-03 - Sr. CATIA Design Engineer - Contract with Denel (South Africa) - Agusta A109 Program - Major Airframe Assembly Jigs ? Flat Patterns ? Engineering Modeling ? Hydroform Tools
5-02 to 9-02 - Sr. CATIA Design Engineer - Contract with Gulfstream - GIV-X Program - Airframe assembly jigs - Installation tools
10-01 to 5-02 - Sr. CATIA Design Engineer - Contract with General Dynamics (Marion Composites) - T-50 (KTX2) and F-16 Programs - Radome Engineering Design - Range Fixtures - Masters - Bonding Jigs - Lay-up Tools - Structural Test Fixtures
5-01 to 9-01 - Sr. CATIA Tool Design Engineer - Contract with Fairchild Dornier - 728 program - Composite Lay-up Tools - Assembly Jigs - Bonding Jigs
1-01 to 5-01 - Sr. Unigraphics Tool Design Engineer - Contract with Eclipse - E500 Microjet Program Concepted Assembly Tools for Fuselage - Producibility and Assembly Line Layout - Tool Engineer
2-00 to 10-00 - Sr. CATIA Tool Design Engineer - Contract with AIDC (Taiwan) - BD100 Program - Secondary Structure Applied Tool Design - Sheetmetal Fab Tool Design - Major Airframe Assembly Jigs - Drawing / Model Checker.
2-99 to 2-00 - Sr. CATIA Design Engineer - Contract with SABCA (Belgium) - Airbus A340 Program - Articulated Flap Track Fairings - Honeycomb / Composite Structures and Mechanical Details.
8-98 to 2-99 - Sr. CATIA Tool Design Engineer - Contract with Lockheed Martin Skunkworks - X35 JSF Program - Composite Lay-Up Dies - Stereo Lith Templates - Wash-Out Composite Mandrels - Crash Recovery Handling Fixtures - Airframe Assembly Jigs - Powerfeed Drill Templates - Ejection Seat Rocket Sled Mod.
8-97 to 7-98 - Sr. Unigraphics Tool Design Engineer - Contract with Boeing/MDHC - Apache Longbow Program - Airframe Assembly Tools - N/C Mill Fixtures - Composite Dies - Lathe Fixtures - Bonding Jigs - Router & Drill Templates.
12-95 to 7-97 - Sr. Tool Design Engineer - Contract with GAMESA (Spain) - SJ30 Light Business Jet Program - Concepted, Illustrated and Described all assembly-line tools for Vendor Offload - Vendor Liaison - Edit Design Manual - Design Signature Authority
3-95 to 11-95 - CATIA Tool Designer - Contract with D3 - Lockheed F-22 Advanced Tactical Fighter Program - Composite Bonding Tools - Composite Lay-up Tools
7-94 to 2-95 - CATIA Tool Designer - Contract with Gulfstream Aerospace ? GV Business Jet Program - Aft Fuselage Major Airframe Assembly Jig
5-93 to 7-94 - Unigraphics Tool Designer - Contract with Northrop Grumman - F-18 E/F Program - Airframe Assembly - Composite Airframe Fabrication - Aft Fuselage Assembly Jig & Masters.
2-93 to 5-93 - CADAM Tool Design - Direct with United Engineers - Airframe Assembly and Workstands - Sikorsky Blackhawk Helicopter Program
11-90 to 2-93 - CATIA Tool Design - Contract with Alenia (Italy) - Airbus A321 and Boeing 767 Programs - Airbus Door Surround and Super Guppy Transportation - Rework Drawings of All Flap and Vertical Tools for 767.
9-90 to 11-90 - Airframe Assembly Tool Designer - Contract with Murdock - Northrop B2 Stealth Bomber Program - Superplastic Titanium Airframe Assembly
12-83 to 9-90 - CADD Tool Design Engineer - Direct with McDonnell Douglas Aircraft - Tooling Engineer, MD80, C-17, & MD11 Programs - Major Airframe Assembly Tooling - Tool Designer, MD80 and T45 (BAe Hawk) Programs - Primary Investigator Advanced Composites Manufacturing R&D
6-83 - Graduated from Orange Coast College with A.A. Degree & Certificate in Drafting ? Mu?Alpha?Theta Mathematics Scholar.