Sherwood Wisdom: Convert to Quick Release?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

dje4msu

Registered
Messages
7
Reaction score
0
Location
Michigan
# of dives
500 - 999
Can the original Sherwood Wisdom I, sold in fixed-hose configuration, be converted to a quick disconnect at the gauge? Is the after-market quick disconnect from Sherwood the same as the factory-installed version? Is this a DIY modification (it would seem to simply be a matter of screwing on the correct fitting) or does a service center have to perform the modification? Thanks.
 
The part number to retrofit a Wisdom with a Quick Disconnect is WHP020. Take that part number to your local dive center and they can order it for you.

As for doing it yourself? I always recommend that the shop do the labor. That gives you two things. First, it gives you the assurance that it is done correctly. Second, if there is a problem with it, the shop is responsible for it. If you install it incorrectly and there is a problem, you will be responsible for any repairs. It is kind of an insurance policy.

Sherwood Scuba
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom