Dacor Equanox Dive computer

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

badgers

badgers

Contributor
Messages
84
Reaction score
0
Location
madison, WI
Anyone have the Equanox Nitrox dive computer here.
I have a used one. It works but the manual sucks and I downloaded the one on dacors website hoping for an updated one. They just scanned the printed manual.

While diving I see three bits of info in the upper right hand corner.
One is temp but what are the other two.
After my first dive at 40% I surfaced and needed to change the Fo2 to 38%(asked for 40 but didn't get it:)) I could not get the thing into surface mode to make the change.
any idea on how to get it out of dive mode when on the boat?

everything else seems to work ok. The big thing is changing the Fo2.

Thank you for your time and have a good day
PS, I am going to Bonaire in June. Anyone been to the Plaza there?
 
Never heard of that computer... good luck with it...

I have stayed at the Plaza in Bonaire twice now. Its a great place. Can't say enough about the Plaza. the only downside may be that its a big place. I still like it very much. Very good dive operator (Toucan). You will have a blast...
 
thanks for the response.
Did you dive nitrox while at the plaza?
I want to know how much over the dive package rate they charge for all nitrox fills?
 
Hi,
I just bought a used Dacor Equanox and I don't have the user manual.
I read in your message that you were able to download the manual from the Dacor site. The site is currently under construction and cannot be accessed.
Could you be kind enough to send me the file you downloaded?
My email address is Sylvain_lamarre@hotmail.com
This would be very appreciated.
Thanks in advance
Sylvain
 
I don't frequent this board as much as I used to.

I will try and attach the quick reference card and the manual.

I did a 400 dpi scan so the manual is a 4 meg file.
 
pdf file limited to 400kb

I posted it on my website, you can get it there.

I will take it down in about a week.

hope it works well for you.
Mine has been fine, I seem to need to change the batteries often, but knowing that I have found it easy to order them online.
 
Thanks for the help badgers. Yeah I need to order batteries from the internet too. When I first bought it, the only place I could find a battery was Radio Shack at a whopping $12 a piece!!
 
Thanks Badgers!
The computer is my wife's. I'll go diving with it and compare the readings with mine to check if everything is OK with it
By the way, we found a battery for it at a Dive shop in Montreal. ($30CAN)
Next time I'll try on the internet...
 
You must log in or register to reply here.

Similar threads

S
Looking for a manual for a Dacor Quantum Loop Puck Dive Computer
Replies
0
Views
305
stewbrew
S
A
Divesoft Freedom computer shows 0.3m on surface
Replies
5
Views
344
Agro
A
olivier67
Problem with Scubapro Galileo G2 mode SOS
Replies
8
Views
630
scubadada
scubadada
S
Suunto Vyper conks out
2 3
Replies
21
Views
1,121
scubazerg
S
S
Bought an Oceanic Dive Computer at an estate sale. What model is this, and is it worth what I paid?
4 5 6
Replies
56
Views
2,723
BRT
B
https://www.shearwater.com/products/teric/

Back
Top Bottom