All gear is new. I bought this gear and it's been sitting in my closet since. Now I need to clear out some things so here it is.
I can take MO or Paypal. All prices included shipping continental US. I can ship outside the US but buyer pays added shipping.
New Apeks S.S. Backplate $110 shipped
http://i26.photobucket.com/albums/c108/comet24/Ebay163.jpg
any spots on the pic are a result of my lacking photo skills. Plate in new.
New Apeks WTX3 wing asking $200 shipped
http://i26.photobucket.com/albums/c108/comet24/Ebay162.jpg
http://i26.photobucket.com/albums/c108/comet24/Ebay161.jpg
Wing description:
This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.
Gussets along each side allow for a full 32 lbs of lift without compromising the overall size of the WTX3.
4 slots allow it to be mounted to a WTX harness or back plate using and upper and lower nylon cylinder bands.
2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used.
A 2 wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesnÃÕ get pushed away from your body.
A 2 D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy.
The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose.
Features the Apeks technical inflator with brass buttons
Includes front, lower left pull dump
Constructed from durable 840-denier nylon.
I can take MO or Paypal. All prices included shipping continental US. I can ship outside the US but buyer pays added shipping.
New Apeks S.S. Backplate $110 shipped
http://i26.photobucket.com/albums/c108/comet24/Ebay163.jpg
any spots on the pic are a result of my lacking photo skills. Plate in new.
New Apeks WTX3 wing asking $200 shipped
http://i26.photobucket.com/albums/c108/comet24/Ebay162.jpg
http://i26.photobucket.com/albums/c108/comet24/Ebay161.jpg
Wing description:
This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.
Gussets along each side allow for a full 32 lbs of lift without compromising the overall size of the WTX3.
4 slots allow it to be mounted to a WTX harness or back plate using and upper and lower nylon cylinder bands.
2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used.
A 2 wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesnÃÕ get pushed away from your body.
A 2 D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy.
The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose.
Features the Apeks technical inflator with brass buttons
Includes front, lower left pull dump
Constructed from durable 840-denier nylon.
Last edited:
