pcscuba
May 20th, 2003, 11:44 AM
I was just wandering if anyone had done a backup light. Made out of delrin or something like that. I have access to a machine shop but I didn't know if someone had already done one and if they had any pointers
|
|
View Full Version : DIY backup light?
pcscuba May 20th, 2003, 11:44 AM I was just wandering if anyone had done a backup light. Made out of delrin or something like that. I have access to a machine shop but I didn't know if someone had already done one and if they had any pointers scottk May 24th, 2003, 02:36 PM pcscuba once bubbled... I was just wandering if anyone had done a backup light. Made out of delrin or something like that. I have access to a machine shop but I didn't know if someone had already done one and if they had any pointers Copolymer Acetal (Delrin is a trade name for DuPonts brand of Acetal) is the material of choice. Do you have access to any CAD/CAM software? If you do, I can e-mail you a 3D solid. Scott jonnythan May 24th, 2003, 02:48 PM Hello Building a flashlight is an act of art not putting some pieces together. This is one serious piece of life support equipment. If you know how much time, money and effort goes into making a flashlight then you will be surprised. It is cheaper, safer and more realistic to just buy one. If you plan a dive with the home made flashlight, and you have a failure, problem or other issue what could be a minor inconvenience could become a fatality. Just buy one that suits your type of diving or needs. For shallow rec stuff a UK or Princeton Tec should do just fine. For tech diving there is no substitute for the Halcyon. scottk May 24th, 2003, 02:55 PM jonnythan once bubbled... Hello Building a flashlight is an act of art not putting some pieces together. This is one serious piece of life support equipment. If you know how much time, money and effort goes into making a flashlight then you will be surprised. It is cheaper, safer and more realistic to just buy one. If you plan a dive with the home made flashlight, and you have a failure, problem or other issue what could be a minor inconvenience could become a fatality. Just buy one that suits your type of diving or needs. For shallow rec stuff a UK or Princeton Tec should do just fine. For tech diving there is no substitute for the Halcyon. If he is a machinist, putting a back-up light together is a snooze. It takes me about an hour to an hour and a half to make one on manual machines. And there are better lights available than the Halcyon or EE Scout: http://www.oxycheq.com/LJ2Light.html Scott Dryglove May 24th, 2003, 02:58 PM jonnythan once bubbled... Hello Building a flashlight is an act of art not putting some pieces together. This is one serious piece of life support equipment. If you know how much time, money and effort goes into making a flashlight then you will be surprised. It is cheaper, safer and more realistic to just buy one. If you plan a dive with the home made flashlight, and you have a failure, problem or other issue what could be a minor inconvenience could become a fatality. Just buy one that suits your type of diving or needs. For shallow rec stuff a UK or Princeton Tec should do just fine. For tech diving there is no substitute for the Halcyon. Holy cow its DIR TEC DIVER's clone. You have been busted buddy. Put your hands where i can see them and slowly back away from the halcyon goods. Your gonna be going away for a long time :mean: jonnythan May 24th, 2003, 04:02 PM Nobody gets a joke these days!! :out: DNAXdiver May 25th, 2003, 10:33 AM scott you wouldn't happen to know who actually makes the lite oxycheck sells?? scottk once bubbled... there are better lights available than the Halcyon or EE Scout: http://www.oxycheq.com/LJ2Light.html Scott scottk May 26th, 2003, 12:22 PM DNAXdiver once bubbled... scott you wouldn't happen to know who actually makes the lite oxycheck sells?? I make a few onesy and twosey's, but the production units are made by a shop near Patrick in LA Patrick assembles the contacts strips and springs himself. Scott corruptor May 30th, 2003, 02:13 PM scottk once bubbled... Do you have access to any CAD/CAM software? If you do, I can e-mail you a 3D solid. Scott Can I take you up on that offer?
Search Engine Friendly URLs by vBSEO 3.6.0 RC 2
|