Folding Dive Table/Platform

[Ocean County Diver]

I know I saw a lot of discussion on here at one point about a folding table to be used to hold tanks etc.

If I remember correctly it was made by ridged and most people picked it up at home depot, but I totally can't find the thread on this again. The search feature is not being my friend!

Does anyone recall this and have a pic/link for it?

Thanks in advance.

[Michael_Lambert]

I have been looking at these.

Amazon.com: Coleman Dynasty Table (30 x 60): Sports & Outdoors (http://www.amazon.com/Coleman-Dynasty-Folding-Table/dp/B000UPHWMO)

[Ocean County Diver]

This was a smaller table. Probably 18X18 or something like that. If I remember correctly it was brought up during a thread about Dutch Springs... I also remember a pic in it that a guys from CA shared of him using it while beach diving to keep his tanks/BC out of the sand.

Thanks for the link though..

[D_B]

This thread ? ... http://www.scubaboard.com/forums/gear-bags-cases/292954-gear-table.html

[mike_s]

I have been looking at these.

Amazon.com: Coleman Dynasty Table (30 x 60): Sports & Outdoors (http://www.amazon.com/Coleman-Dynasty-Folding-Table/dp/B000UPHWMO)

personally I don't think those are strong at all.... they are aluminum and will dent inwards.

If you want a small table that size, then SAMS has a small PVC folding one for about $30 bucks that is much stronger. We use it as the quarry all the time, but mostly for a food/drink/snack table.


This is what I'm talking about. it's about 4' long, folds in half (to 2' by 2') and easily goes in your trunk. adjustable height also

http://graphics.samsclub.com/images/products/0008148342941_LG.jpg




For setting a pair of Doubles on, etc.... I'd suggest the Husky table in the thread that DB linked.

[Ocean County Diver]

This thread ? ... http://www.scubaboard.com/forums/gear-bags-cases/292954-gear-table.html

BINGO! Unfortunately, I can't pull this up on the Home Depot site at all.. Even a google search doesn't give many responses. Maybe they stopped selling these. hmmm

I'll have to check out the tables at Costco too that Mike is suggesting..

Thanks everyone!

[ScubaSteve]

BINGO! Unfortunately, I can't pull this up on the Home Depot site at all.. Even a google search doesn't give many responses. Maybe they stopped selling these. hmmm

I'll have to check out the tables at Costco too that Mike is suggesting..

Thanks everyone!


As I recall this was NOT available at all Home Depots so that may be why you cannot pull it up.

[mike_s]

BINGO! Unfortunately, I can't pull this up on the Home Depot site at all.. Even a google search doesn't give many responses. Maybe they stopped selling these. hmmm

found them at Home Depot Canada.
Husky - X-Workhorse - 17185155 - Home Depot Canada (http://www.homedepot.ca/webapp/wcs/stores/servlet/CatalogSearchResultView?D=976622&Ntt=976622&catalogId=10051&storeId=10051&langId=-15&Dx=mode+matchallpartial&Ntx=mode+matchall&recN=113186%204294966433&N=0&Ntk=P_PartNumber)

Might not be where you want to order from, but it gives the important information such as PN, Sku, Model, etc

Model: 17185155
Internet/Cat #: 976622
Store SKU #: 1000122503


putting "Husky 17185155 " appears to only bring up Canadian results though. might be country specific for some reason.


I'll have to check out the tables at Costco too that Mike is suggesting..



btw... the one I got was at SAMs, but costco might have them also... not sure if they are strong enough for a set of doubles though, FYI.


here's another thread on SB on the Husky table. apparently there are some availability issues as of last year

http://www.scubaboard.com/forums/norcal/254820-work-platform.html

[HenrikBP]

I just picked up a Husky X table at my local Home D. New York City. I've seen them in PA as well. I would think they would have them in most locations.

Henrik

[evad]

I just picked up a Husky X table at my local Home D. New York City. I've seen them in PA as well. I would think they would have them in most locations.

Henrik



The one on twenty third street?

[HenrikBP]

The one on twenty third street?

No, I'm out in Queens. Woodhaven Blvd. store. I think I've seen them in the 59th Street/Lex store. Haven't checked recently though.

Henrik

[evad]

Thanks. I didn't even know there was one on 59th.

[crlavoie]

Ed from Scuba Shack in Rocky Hill CT ran out and bought up a whole bunch of the Stanley ones when they were discontinued. They are the same ones you see in the
5th Dx videos.

It's been a year but he had a bunch in the store last time I was there. However, I think he was selling them for around $80 which is pretty steep. You might give him a ring.

[mike_s]

you could always order one from the Canadian Home Depot and have it shipped. (might be cheaper).

or get one of our Canadian board members to pick one up for you and send it, if they were willing... . etc.

[ScubaSteve]

you could always order one from the Canadian Home Depot and have it shipped. (might be cheaper).

or get one of our Canadian board members to pick one up for you and send it, if they were willing... . etc.


:hm: :thumb:

[carrielsal]

Hey...nice table. I have been looking for something like this, also.