In Roatan now with two DS-160 strobes, the smart charger does not light up at all when plugged in. The outlet is fine, charger and strobes are less than 6 months old. Any ideas?
Help!
- Thread starter txdano
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
ScubaBasics
Contributor
Both packs do not charge? Best guess would be the plug on the end of the charger cord. They sometimes get broken.
Karl
Ikelite Repair & Scubabasics Sales
Karl
Ikelite Repair & Scubabasics Sales
OP
I have 3 packs, the charger does not light up when plugged into any of them. It was working the day before.
Ikelite Staff
Contributor
From your explanation it sounds like an issue with the charger plug. Though you may try the suggestion under "Why would my Smart Charger not operate?" here:
IKELITE Underwater Systems
Also try wiggling the end of the charger plug and then plugging it into the pack. If there's a bad connection or broken wire this may help you find a "good spot" and charge your packs until it can be repaired.
Regards,
Jean / Ikelite
IKELITE Underwater Systems
IKELITE Underwater Systems
Also try wiggling the end of the charger plug and then plugging it into the pack. If there's a bad connection or broken wire this may help you find a "good spot" and charge your packs until it can be repaired.
Regards,
Jean / Ikelite
IKELITE Underwater Systems
OP
Thanks for the ideas, will give it a try.
Similar threads
