Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
@LowVizWiz: I realize that you think the OP should just RTFM...but his problem might be more complicated than that.
I suspect that's the problem that the OP is having. My buddy has a Vyper that has a grey face. His computer can switch back and forth between metic and imperial units with just a few button presses. My Vyper has a teal face and was sold as metric only. It's crazy. The menu option that allows selection of units just simply wasn't there. I suspect that the OP's Vyper (with black face) was sold as imperial only.I only assumed he did not have access to the manual or knew where to find it. I was not aware of metric/imperial specific units thanks for pointing that out. I hope that's not the case with the OP's unit.
I got an older suunto vyper(black), but it does not have user selectable units. how to change from Fahrenheit to Celsius?
@Jim Baldwin: You should read the info in Post #3 of this thread. Try it out and let us know if it works.I bought a used Vyper from a guy who was a diver working on a cruise ship. He sold the computer, drysuit and bunch of mis. gear.
Checked the computer it was metric. This unit was apparently a European model? There was no way to change from standard to metric. Followed the manual but could not change the mode. You may have the same problem.
This is Suunto BS.
http://liquidimagephoto.com/SuuntoTools/Project1.zip
This program will let you set the units by software. You will need the cable unfortunatly.
If you know someone with one, it is a one time change.
Like the Gekko download thing - it's a single bit in the user memory. Suunto just left the user settable option out of the older versions of firmware.
@hdugan: Did you read my entire post (Post #3 in this thread) before responding?This is Suunto BS.
Liquid Image Photo
This program will let you set the units by software. You will need the cable unfortunatly.
If you know someone with one, it is a one time change.
Like the Gekko download thing - it's a single bit in the user memory. Suunto just left the user settable option out of the older versions of firmware.