Din fittings

[deepsix33]

I have a question pertaining to DIN valves and plumbing, I know
that 200Bar=2940 & 300Bar=4410, what is the differrence between 200 Bar and & 300 Bar manifolds. And is there any compatibility? As you have already guessed I don't have any DIN equipment.
Thanx
Deepsix

[Dryglove]

deepsix33 once bubbled...
I have a question pertaining to DIN valves and plumbing, I know
that 200Bar=2940 & 300Bar=4410, what is the differrence between 200 Bar and & 300 Bar manifolds. And is there any compatibility? As you have already guessed I don't have any DIN equipment.
Thanx
Deepsix

The main visible difference is the 300 bar has more threads. The 200 bar can be used as a din or a yoke with the inserts.

You can use a 300 bar reg on a 200bar or a 300 bar valve. A 200 bar reg will not fit a 300 bar valve.I havent seen a whole lot of 200 bar regs but they are out there.

I have a set of doubles with the 300bar and a set with the 200bar. If you want pics to see the difference let me know.

[deepsix33]

lal7176
Thanx for the rapid reply! Yes I woul like to see a photo of your set-up! I kinda thought that the 300 bar set-up would have deeper threads! thanks again deepsix33

[Dryglove]

200 bar

[Dryglove]

200 bar with a yoke insert

[Dryglove]

200 bar valve with a 300 bar reg

[Dryglove]

300 bar valve

[Dryglove]

300 bar valve with a 300 bar reg

[omar]

200 bar is 2900 psi
300 bar is 4351 psi

(1 bar = 14.5 psi)