BC inflator hose [Archive] - ScubaBoard

View Full Version : BC inflator hose


Sponsored Link
CrazyUncle
October 17th, 2010, 04:47 PM
I need a quick answer, is the BC inflator hose standard for all or most BC's without an air source? Or do they differ per manufacturer?

Rubber Duckie
October 17th, 2010, 04:55 PM
I am not sure about the size and length but I have rented and used reg sets from many different shops and never had one that wouldn't connect.

CrazyUncle
October 17th, 2010, 04:57 PM
I'm taking my regs on a cruise tomorrow and renting a BC, just wondering if the hose will work. Thanks.

claymore
October 17th, 2010, 05:01 PM
If the hose connects to a standard inflator there should be no problems. Standard Inflator connections are an industry standard.

CrazyUncle
October 17th, 2010, 05:03 PM
Ok great! Thank you. I Have one but its about 5 inches shorter than the Air2 hose. Does that sound right or should they be about the same?

Crush
October 17th, 2010, 05:33 PM
I don't think that it matters. You should be fine.

knowone
October 17th, 2010, 05:34 PM
Sounds right.

ozziworld
October 17th, 2010, 05:59 PM
You should not have any problems unless the shop renting out the bc has air2s. Unlikely though. and if they did, they would most likely have an adapter available.

Divers I know that have air2s have the adapter or swap out the inflator hose when they travel without their regular bc. The air2 connector is bigger than the regular inflator hose connector.

Sponsored Link

Search Engine Friendly URLs by vBSEO 3.6.0 RC 2