DonkeyChomps
New
For Sale :
Sea & Sea TTL YS Converter/N for Nikon
It's had very light use, bascially no more than 10 dives.
Original box + Manuals
I'm looking in the region of £400
My contact email if your interested:
tom_horsman@hotmail.com
Features
The Sea & Sea YS TTL Converter allows TTL exposure control when connected to a Sea & Sea housing for Nikon digital SLR cameras. The converter is compatible with all current Sea & Sea YS strobes including the YS-250Pro. The converter allows quick switching underwater between TTL mode and manual mode from outside the camera.
You can use the TTL correction dial after checking the results of a shot in the LCD monitor to adjust the amount of strobe light for the next shot. Because the converter comes with two top mounted strobe connectors, you can use advanced automatic TTL flash adjustment with two strobes. You can even use two different YS strobe models.
Compatibility Chart
Compatible Housings
The converter is compatible with Sea & Sea housings for Nikon cameras with a TTL bulkhead
Compatible Strobes
The converter is compatible with all current Sea & Sea Strobes (YS-110 can not be used with the MDX-Pro D3 housing)
Control
TTL mode with TTL adjustment dial from +2 to -2 in 1/3rd stops
Manual
Battery Compartment
The converter features a plastic hand-tighten battery compartment
Battery
Included CR2 lithium battery
Be aware: if the power runs low, the connected YS strobes might misfire
Specifications
Construction Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)
Controls OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)
Battery CR2 lithium battery (included)
Strobe-side connector x 2 (for Sync cord/N)
Depth rating 60m / 200ft
Dimensions (WxHxD) 68x90x103mm / 2.7x3.6x4.1inch
Weight Approx. 400g / 12.3oz (including CR2 battery)
Sea & Sea TTL YS Converter/N for Nikon
It's had very light use, bascially no more than 10 dives.
Original box + Manuals
I'm looking in the region of £400
My contact email if your interested:
tom_horsman@hotmail.com
Features
The Sea & Sea YS TTL Converter allows TTL exposure control when connected to a Sea & Sea housing for Nikon digital SLR cameras. The converter is compatible with all current Sea & Sea YS strobes including the YS-250Pro. The converter allows quick switching underwater between TTL mode and manual mode from outside the camera.
You can use the TTL correction dial after checking the results of a shot in the LCD monitor to adjust the amount of strobe light for the next shot. Because the converter comes with two top mounted strobe connectors, you can use advanced automatic TTL flash adjustment with two strobes. You can even use two different YS strobe models.
Compatibility Chart
Compatible Housings
The converter is compatible with Sea & Sea housings for Nikon cameras with a TTL bulkhead
Compatible Strobes
The converter is compatible with all current Sea & Sea Strobes (YS-110 can not be used with the MDX-Pro D3 housing)
Control
TTL mode with TTL adjustment dial from +2 to -2 in 1/3rd stops
Manual
Battery Compartment
The converter features a plastic hand-tighten battery compartment
Battery
Included CR2 lithium battery
Be aware: if the power runs low, the connected YS strobes might misfire
Specifications
Construction Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)
Controls OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)
Battery CR2 lithium battery (included)
Strobe-side connector x 2 (for Sync cord/N)
Depth rating 60m / 200ft
Dimensions (WxHxD) 68x90x103mm / 2.7x3.6x4.1inch
Weight Approx. 400g / 12.3oz (including CR2 battery)
