FloridaDM
Contributor
Need this hose to create a custom fill whip. I use 2 old first stages w/ a HP hose w/ 2 male fittings to equalize air........PM me if any divers out their have a spair one, thanks.
HP hose w/ 2 male fittings
- Thread starter FloridaDM
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
cool_hardware52
Contributor
Remember the 7/16 (reg end) fitting of HP hoses feature a tiny *PIN* hole.
You are going to need a lot of patience to use such a hose for trans filling.
Tobin
DiveGusto
Contributor
Get one made here . They made a whip for me to fill a pony BAUER Compressors genuine parts and full service with August Industries - August Industries Inc.
DiveGusto
Contributor
I don't remember but basically costs only very based on the length of hose. Pick your fittings specify length presto. Also their air fittings and hose are O2 clean.
Question though why are you trying to push gas back through a 1st stage instead of using a yoke or din filler?
Question though why are you trying to push gas back through a 1st stage instead of using a yoke or din filler?
Similar threads
