Suunto high pressure quick disconnect - never been wet

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Status
Not open for further replies.

Dack

Contributor
Messages
82
Reaction score
5
Location
Roseville, CA
# of dives
0 - 24
Yours for $45 including USPS Priority Shipping, retails for $90. I love this high pressure quick disconnect for disconnecting the dive computer between dives or in transport. It fits the entire Suunto console range as well as Cobra/Cobra2/Cobra3.

This has been installed on a pressure gauge and then removed, but has never been wet. Includes all parts you see here and instructions in the original box, plus an O-ring that goes on the gauge. The two rubber plugs keep the ends dust free when disconnect.

I originally bought this for a 2nd regulator setup which hasn't happened yet. In the meantime I decided to switch over to a wrist mounted computer, so I no longer need the quick disconnect.

- Dack


Suunto Quick Disconnect for Computer Gauges


QuickDisconnect.jpg
 
Status
Not open for further replies.
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom