Download Cable for Pro Plus 2

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

JTemple

Contributor
Messages
217
Reaction score
19
:confused:

Does the cable for the 2.1 work for the 2?

I've read on the forums a reference to the "older cable" vs "the newer cable". Are there 2 different cables for the 2, or does this refer to the 2 vs 2.1? And, what is the difference anyway?

Also, are there model numbers available to be sure I purchase the correct one?

Thanks in advance!

Signed,
Confused in CA
 
Thanks for the prompt reply! If you have easy access to the PP2 number, I'd appreciate it!

Thanks again!
 
I pulled out both computer cables. To my surprise, there is no sticker for P/N on the Pro Plus 2 cable.

I searched the Internet and I believe it should be 04.9600.

Attached is a picture of both cables. The one on left (bigger one with word "Oceanic") is for Pro Plus 2, and the one right is for Pro Plus 2.1

IMAG0125.jpg

I hope this helps.
 
There are 3 cables actually version 1,2,3 the picture shows version 1 and 3. Version 1 and 2 look the same but are not interchangeable. 04.9600 is the correct number for the pro plus 2 computer.
 
Good to know about the PP3. I wanted to cry when I found out the 2 wouldn't work with the 2.1. Common sense would say....?? Yet oddly enough, my PP2.1 works on a Wisdom 3. Go figure.

A universal cable for these would be so easy to do.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom