Standard port for Tokina 10-17 or 10,5 Nikon with Kenko tc 1,4 pro

lorenzoterraneo · Jul 16, 2013

Hallo, in my holiday i would try combination with my ikelite house for d300s and my tokina 10-17 or my nikon 10,5. For problems with weight, i prefere use a standard port instead of port assembly (i know is possible tokina + tc + 5510.16).
Which standard port is ok ?

I thought 5503.50 - for tokina 10-17

I thought 5503 - for nikon 10,5

Thank in advice from Italy !

Ikelite Staff · Jul 16, 2013

Use 5503 port for Tokina 10-17mm.

Use the shorter 5503.15 port for Nikon 10.5mm Fisheye.

Regards,

Ikelite

lorenzoterraneo · Jul 16, 2013

Thank you Staff, but i ask port with kenko teleconverter 1,4 pro 300.
You indicate the right standard port only for objective.

I thought 5503.50 - for tokina 10-17 + kenko tc 1,4 pro 300 ? Is right?

I thought 5503 - for nikon 10,5 + kenko tc 1,4 pro 300 ? Is right?

Thank you in advice.
Lorenzo

---------- Post added July 16th, 2013 at 04:17 PM ----------

[FONT=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]Barrel length:[/FONT] [FONT=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]27.0mm approx.[/FONT]

Ikelite Staff · Jul 16, 2013

Sorry, I misread the question. Regretfully we cannot provide a direct recommendation for a lens with the Kenko Teleconverter as we do not have access to this equipment.

Measure the fully extended length from the camera body to the end of the lens + teleconverter. If less than 76mm, use 5503. If between 76mm and 101mm, use the 5503.50.

Regards,

Ikelite Staff

Standard port for Tokina 10-17 or 10,5 Nikon with Kenko tc 1,4 pro

Please register or login

lorenzoterraneo

Registered

Ikelite Staff

Contributor

lorenzoterraneo

Registered

Ikelite Staff

Contributor

Similar threads