I have a VT3 set on 30-second logging with a wireless pressure transducer/ wireless on a ScubaPro S600/ MK25 regulator.
Yesterday, I had a free-flow, and at that moment, data from the computer seems to indicate a momentary loss of link, upon re-acquire of signal, the pressure read 2344 psi, which was correct. I went on octo, and tried to resolve the free-flow (to no avail), and the pressure dropped rapidly as I was down below 95 ffw. The pressure logged 2128 psi for two minutes (4 records), then logged 2080 psi, for the next two minutes (another 4 records). It actually logged a :00 dive time remaining while still at 66 ffw, which was about right as I went on my buddies secondary at that point as I was OOA.
Although the pressure was dropping rapidly (2344 to about 0 in less then 3 minutes), the computer continued to log invalid data, although the computer itself did show 0 psi.
Any thoughts on the behavior?
Yesterday, I had a free-flow, and at that moment, data from the computer seems to indicate a momentary loss of link, upon re-acquire of signal, the pressure read 2344 psi, which was correct. I went on octo, and tried to resolve the free-flow (to no avail), and the pressure dropped rapidly as I was down below 95 ffw. The pressure logged 2128 psi for two minutes (4 records), then logged 2080 psi, for the next two minutes (another 4 records). It actually logged a :00 dive time remaining while still at 66 ffw, which was about right as I went on my buddies secondary at that point as I was OOA.
Although the pressure was dropping rapidly (2344 to about 0 in less then 3 minutes), the computer continued to log invalid data, although the computer itself did show 0 psi.
Any thoughts on the behavior?