jhelmuth
Contributor
I am offering up a really nice, well cared for, Ikelite housing for the Cannon D5 Mark II camera with tray, 8 dome port and 2 port tubes. I bought this thinking I would get into full frame (and maybe I will eventually), but I need to keep with my m4/3 system for now.
Here is a list of everything included:
I am not the original owner, so I am not certain how many dives are on this rig, but it has been used and is in very nice condition (obviously well cared for). I got this with all buttons working smoothly (I still serviced them anyway), TTL circuit was demonstrated working (and Ike TTL connector is perfect), no corrosion (from poor maintenance) really just a well kept kit. Ive leak tested it @ 10 (pool test) for 6 hours (with button pushing and dial turning) and it was 100% good zero water intrusion. I havent been able to use this deep or with a Canon 5D as I dont yet have one to test with. The port tubes are the correct size for many/most of the popular lenses which might be used with this kit. So all one should need to add is the Canon 5D itself (with lens) + strobe(s) and TTL cord(s).
Of note: Inspection will find the following issues (all minor) Housing is fitted with the new low profile port locks (4x) which is good and required for the superwide low profile port (2.75); however, 2x of these have some negligible flaws (meaning they are functional, but could use replacing). Housing has typical micro scratching on surfaces, but there is some localized scratches on the case/housing underside where it attaches to the tray (I think these are normal). 8 dome shade has some very minor digs on a couple of its edges (not easily noticed and definitely nothing wrong no cracks or damage).
Id like to ask $1050 + shipping for everything (OBO), I could go as low as $725 for just the housing
If you have a nice Canon 5D Mark II you'd part with for a fair price, let me know, as I might buy/trade for it and end up using this nice rig for myself!
I have 100% perfect reputation with ebay (score of 574 ID = coach*jim since 2000) and on every forum Ive ever sold anything (and typically I get feedback that notes condition is even better than I described). But I always will listen to any complaints you might have if this is not what you expected upon inspection/testing. Even if you change your mind, Im happy to refund everything except shipping as long as its returned back to me in same condition and all original materials.
Here is a list of everything included:
- Ikelite case #6871.02 (TTL) for Canon 5D Mark II (incl. dbl release handle tray no ports - $1600)
- Ikelite part # 5510.45 modular 8 dome with cover ($400)
- Ikelite part # 5510.24 8 dome zoom body (4.25 extension for modular 8 dome - $125)
- Ikelite part # 5510.11 8 dome superwide body (2.75 extension for modular 8 dome - $125)
- Ikelite part # 9059.8 Focus/Zoom ring clamp with springs ($15)
- Ikelite part # 9059.9 Focus/Zoom ring clamp with springs ($15)
- Misc. small parts such as maintenance kit, dome locks, manuals, etc.
I am not the original owner, so I am not certain how many dives are on this rig, but it has been used and is in very nice condition (obviously well cared for). I got this with all buttons working smoothly (I still serviced them anyway), TTL circuit was demonstrated working (and Ike TTL connector is perfect), no corrosion (from poor maintenance) really just a well kept kit. Ive leak tested it @ 10 (pool test) for 6 hours (with button pushing and dial turning) and it was 100% good zero water intrusion. I havent been able to use this deep or with a Canon 5D as I dont yet have one to test with. The port tubes are the correct size for many/most of the popular lenses which might be used with this kit. So all one should need to add is the Canon 5D itself (with lens) + strobe(s) and TTL cord(s).
Of note: Inspection will find the following issues (all minor) Housing is fitted with the new low profile port locks (4x) which is good and required for the superwide low profile port (2.75); however, 2x of these have some negligible flaws (meaning they are functional, but could use replacing). Housing has typical micro scratching on surfaces, but there is some localized scratches on the case/housing underside where it attaches to the tray (I think these are normal). 8 dome shade has some very minor digs on a couple of its edges (not easily noticed and definitely nothing wrong no cracks or damage).
Id like to ask $1050 + shipping for everything (OBO), I could go as low as $725 for just the housing
If you have a nice Canon 5D Mark II you'd part with for a fair price, let me know, as I might buy/trade for it and end up using this nice rig for myself!
I have 100% perfect reputation with ebay (score of 574 ID = coach*jim since 2000) and on every forum Ive ever sold anything (and typically I get feedback that notes condition is even better than I described). But I always will listen to any complaints you might have if this is not what you expected upon inspection/testing. Even if you change your mind, Im happy to refund everything except shipping as long as its returned back to me in same condition and all original materials.
