Viking Dry Glove Ring System

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Allan459

New
Messages
2
Reaction score
0
Location
Calgary, Alberta, Canada
# of dives
200 - 499
Can my Bare Nexgen Pro drysuit accept a Viking Dry Glove Ring System? My LDS said you cannot glue cuffs, pockets, suspenders, nothing to the NexGen.
 
yep the rings work on any straight latex cuff ...
 
Can my Bare Nexgen Pro drysuit accept a Viking Dry Glove Ring System? My LDS said you cannot glue cuffs, pockets, suspenders, nothing to the NexGen.

I've had good luck putting new wrist seals (PB300) and adding pockets (Aquaseal) to my Nexgen. You have to clean the area multiple times with MEK, but it both are holding up quite well.
 
I'm using the vikings on my Bare SB system...no problems. No glue involved.

You should have no problems changing wrist or neck seals on Nex Gen.
Pockets should not be a problem either.

Not sure which shop in Calgary you are using...I would call the other shops or Darrin Barker in Airdrie.

Cheers!
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom