Mndiv
Contributor
I am considering getting a set off doubles sometime in the far off future and first off I just wanna say that I know practically nothing about doubles, except that 200 and 300 bar mean different number of threads and therefore a different pressure rating.
Currently I have an Edge Epic Cold water environmentally sealed first stage (Yoke) and I know that I would need a second one. If/when I do get doubles I would be looking at something along the lines of two AL80's which I know you can assemble yourself or buy in a package on both scubatoys.com and diverightin scuba.
So are doubles DIN? Would I be fine mounting two yoke first stages on a set of AL80 doubles, and if no is there a way to convert my Yoke first stages to DIN with like a DIN converter plug?
Really any info would help at this point, so as always thanks!
Currently I have an Edge Epic Cold water environmentally sealed first stage (Yoke) and I know that I would need a second one. If/when I do get doubles I would be looking at something along the lines of two AL80's which I know you can assemble yourself or buy in a package on both scubatoys.com and diverightin scuba.
So are doubles DIN? Would I be fine mounting two yoke first stages on a set of AL80 doubles, and if no is there a way to convert my Yoke first stages to DIN with like a DIN converter plug?
Really any info would help at this point, so as always thanks!