Partial Pressure Gas Blending Station

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Status
Not open for further replies.

goodusedstuff

Registered
Messages
14
Reaction score
1
Location
Midwest
# of dives
Up for auction is a "Top Of The Line" partial pressure gas blending system. This system can be used to mix any nitrox or trimix diving gas that you desire including anoxic, normoxic, hyperoxic, mixes along with 100% O2 fills for your fully closed circuit rebreathers, medical O2 and deco bottles. The system comes with all the adapters to fill nitrox tanks, rebreather bottles, SCBA's, and medical O2 bottles. You name the cylinder and/or the dive gas mix and you can fill it with this system. System comes with the following: (All components are 100% O2 compatible)
1) Manifold w/mounting bracket and static electricity ground line
2) Four steel braided fill whips (Can be converted between DIN and Yoke style valves. Also included are medical O2 and high pressure {SCBA} fill adapters that can be attached to one of the fill whips
for filling these style of cylinders)
3) Digital pressure gauge
4) Helium, Oxygen, Hyper Air control valves to control gas flow(These control valves also have directional valves so you cannot backfill any of your supply cylinders)
5) Helium, Oxygen, Hyper Air needle valves to control gas flow rates so you don't exceed accepted safe fill rates
6) Main Helium and Oxygen steel braided supply lines include analog supply pressure gauges, hand tight nut nipples, and bleeder valves. These lines also come equipped with high pressure quick disconnects
7) Also included is all the hardware such as steel braided pig tails and nut nipples to build a three cylinder Oxygen and Helium cascade system for supply to the manifold
8) Donaldson Ultrafilters with mounting bracket, flow control valve, bleeder valve, and back pressure valve. Also included is a steel braided whip to attach the filter system to the manifold in order to supply OCA
(Oxygen Clean Air) air to the manifold. This filter system is better than the Lawrence Factor systems and is much more compact than the Lawrence filter towers making them easier to use in the field if you so choose.

System is like new and in good condition. I no longer have a need for this station. My loss is your gain - this system sells for over $5000 brand new.

Asking $2500 or best offer. Email any questions to sellingeverything2012@gmail.com
No returns.
 
Status
Not open for further replies.

Back
Top Bottom