Welcome to ScubaBoard, an online scuba diving forum community where you can join over 205,000 divers diving from around the world. If the topic is related to scuba diving, this is the place to find divers talking about it. To gain full access to ScubaBoard (and make this large box go away) you must register for a free account. As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 5,500,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from well over 100,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
Find a dive buddy or communicate directly with scuba equipment manufacturers.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
NEW for 2014 Access SBlogbook for members. It allows you to directly upload data from your dive computer, validate your logs digitally, link your dives to photos, videos, dive centers (9,000 on file), fishes (14,000 on file) and much more.
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
Which type/grade of teflon tape do you recommend for high pressure air applications when using NPT fittings, etc? I ask because I ordered some fittings and valves from one of the online suppliers that specializes in selling these type things for scuba compressor use, I also ordered some teflon tape from this supplier (not knowing where any of the rolls I had previously bought had disappeared to), the teflon tape that arrived was standard "commercial grade" white teflon tape, the fine print said it was rated to 150 psi. In other applications (pre built whips, etc) I have seen both white and heavier yellow (gas grade?) teflon tape used.
I have been using the tape available from my local Swage-Lok distributor for most gas applications, for well over 20 years. It seems to be twice as thick as the stuff you get at the local hardware store. I also use a gas specific tape for oxygen. On both, I put a small dab of O2 compatible grease to help things along. Especially for stainless and monel 400.
Isaac, the subject of tape is simple except when it's not. I never heard of tape with a psi rating. Learned something new. When sinking large valves into iffy thread I use a thick tape. Actually, an NPT valve is supposed to seal with one to three exposed threads but on old, vintage equipment this may only be possible using thick tape. When joining stainless I use thin tape, particularly when the thread size is 1/4 inch NPT, NGT or smaller. There are certain delicate connections such as sinking a stainless, 1/8 inch NPT into an aluminum or brass block. I use teflon paste in these applications and moderate torque. This type of joint is so effective that the sealed parts can be rotated slightly to make the connection align without breaking seal. Also, if a stainless to stainless fit is rough, cranky and won't seal, the paste will make it seal most of the time. If that doesn't work there is something wrong with the thread and may need chasing with a tap or die. The product which I use are white in color and may or may not be oxygen rated, especially paste. However, I see no reason that teflon tape cannot be used in oxygen.
I witched from teflon tape to Permatex Thread Sealent with Teflon. It is rated to 3000psi and as Pescador says it allows rotation for alignment. It also seals leaks that won't seal with teflon tape. Only down side is it is not for oxygen service.
Nothing is foolproof to a truly talented fool
Law of Illogical Argument - Anything is possible if you don't know what you are talking about.
OMG... I have never considered and heard about a rated Teflon tape. I am also using the standard Teflon tape (white) from the local HW stores. I saw that there is twice thick tape for an gas application (as I recall, it is yellow). I am simply putting more tape on the threads. I am regularly checking a leak with a soapy water. So far so good..
Based on my experience, the check and Priority valves are more leaking points than the Teflon tape in itself.
For a commercial base, I can see the point, but for an individual base..... I think it is overkill..
Guys... Make sure your hands are O2 cleaned as well...