Is there any chance of DSS coming out with a V2 of the Uwatec BT/2G mount?
Welcome to ScubaBoard, an online scuba diving forum community where you can join over 205,000 divers from around the world discussing all things related to Scuba Diving. To gain full access to ScubaBoard (and make this large box go away) you must register for a free account. As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 5,500,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from well over 100,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
Is there any chance of DSS coming out with a V2 of the Uwatec BT/2G mount?
I have a Uwatec mount with about 30 dives on it and is starting to tear at the bottom of the mount. After searching through this forum and the computer and gauges forum I have found many other people with this problem so I'm not the only one. I also have one of the new Pelagic compass mounts and this new design is much more robust in the affected area. I was hoping you would come up with a revised Uwatec mount to add more material in the affected area. The two pictures are of my two mounts the first the Pelagic mount and the second the Uwatec mount.Picture 012 (Small).jpgPicture 011 (Small).jpg
Yes it can tear, but it seams you addressed the issue in your newest mount. It would take a lot to tear this new mount. I think my problem may be that the bungees need to be tight enough to hold the instrument on my arm so it will not move around but be loose enough to fot over cuff rings.
Yes it can tear, but it seams you addressed the issue in your newest mount. It would take a lot to tear this new mount. I think my problem may be that the bungees need to be tight enough to hold the instrument on my arm so it will not move around but be loose enough to fot over cuff rings.
1) Use bungee that stretches more easily, we recommend the 5/32" we sell
2) Lace you mount with one continuous piece of bungee, provides more over all length of bungee to stretch, and it allows for easier adjustment of the two loops relative to each other.
1Likes
LinkBack URL
About LinkBacks
Reply With Quote
Originally Posted by Aqua-Andy
