Welcome to ScubaBoard, an online scuba diving forum community where you can join over 205,000 divers diving from around the world. If the topic is related to scuba diving, this is the place to find divers talking about it. To gain full access to ScubaBoard (and make this large box go away) you must register for a free account. As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 5,500,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from well over 100,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
Find a dive buddy or communicate directly with scuba equipment manufacturers.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
1) The battery tray is only held by 3 screws. Located in the bottom of the compartment and plugged with rubber plugs. 2 are aligned with the red-treaded holes, and one is aligned and close to the moisture contacts. Other 2 holes have no function.
2) Mid section: Remove the battery tray and pc board assembly. In the bottom of the mid section, there is a black plastic segment which holds the pc board contacts. It has another 2 short screws, right by the electrical contacts. There is no need to loosen up these screws.
The mid section is screwed to the motor compartment by 6 long screws, which are accessible through the black plastic segment.
LinkBack URL
About LinkBacks
Reply With Quote
